|
L’ampli Chevin S1504 est conçu pour relever tous les défis de la sonorisation professionnelle. Un châssis de qualité et une électronique performante pour une puissance maximale avec une qualité sonore digne des amplis de haute fidélité.
Technical specification
Output Power
Both channel driven, 2,7 Ohm, 1 kHz, 1 % THD 1500 W per channel
Single channel driven, 2,7 Ohm, 1 kHz, 1 % THD 1720 W / channel
Both channel driven, 4 Ohm, 1 kHz, 1 % THD 1320 W per channel
Single channel driven, 4 Ohm, 1 kHz, 1 % THD 1444 W / channel
Both channel driven, 8 Ohm, 1 kHz, 1 % THD 800 W per channel
Single channel driven, 8 Ohm, 1 kHz, 1 % THD 840 W / channel
Bridge, 8 Ohm, 1 kHz, 1 % THD 2600 W
Distortion, 1 kHz, THD % < 0,02 %
Frequency response
- by 10 dB below nominal power
20 Hz – 20 kHz +0 /-1 dB
20 Hz – 50 kHz +0 /-1 dB
Damping Factor, 8 Ohm, 1kHz > 200
S/n Ratio
S/n Ratio „A“ weighted
- 103 dB
- 112 dB
Input Sensitivity – by nominal power / 8 Ω 1,0 V
Input Impedance balanced 20 kΩ
Slew Rate / 8 Ω 20 V / μS
Subsonic filter On / Off 40 Hz / 80 Hz
Controls Front: mains switch
gain control (both channels)
Rear: mode selection switch
GND and subs. filter switches
Indicators Bridge, Limit In, - Out: yellow LED
Protect : red LED
Signal: green LED
Power: blue LED
Cooling step switched fan
air flow: front to back
Protects short-circuit, thermal, load-mismatch, DC
Power AC ~ 230 V / 120V 50 / 60Hz
Dimensions 483 x 88 x 388 mm (2U)
Weight 12,0 kg
|